Back to the main page Back to category Dune Buggies and Sand Rails
Bike details
Custom Street Legal V8 LS Street Rail Dune Buggy (400HP & 1500LBS)
Estimated price for orientation: 40 000 $
Category: Dune Buggies and Sand Rails
Class:
Description Condition: Used Street Legal: Yes
MAKE AN OFFER!OPEN TO TRADES!!! (C6 Zo6, Viper, Custom Cars...ETC)The frame has been powder coated Metallic Orange with custom airbrushing on the roof and side panels. The cabin features fixed seats, multi-point harnesses, and a Kenwood stereo & amp. The build cost around $66k, and it has covered approximately 4,800 miles since it was completed. This custom rail is completely street legal and has a clear Illinois title in the seller’s name. It is Based on 15’ frame from East Coast Rails, the chassis has been modified for a front engine, wishbone front suspension, and a solid rear axle. The custom-built frame features minimal bodywork and has been powder coated in Metallic Orange. The roof and rear-cabin quarters feature skull and flames airbrush work. Behind the cockpit is a 13-gallon polished stainless steel fuel tank and an open-top rear luggage compartment. Although not pictured, an electric windshield wiper has been installed.Autometer gauges provide engine vitals, gas meter, rpm, oil, coolant, mph and a B&M T-handle gear-selector controls the automatic transmission. A Kenwood stereo is mounted behind a waterproof enclosure in the center console, with speakers mounted behind the seats. The floor is finished in a textured black grip coating. The independent A-arm front suspension uses adjustable coilover shocks and power steering. A set of newer Mickey Thompson tires have been fitted on black Speedline wheels that measure 15×7” in the front and 15×10” out back. Braking is handled by front and rear discs. Power is sent to the 10-bolt 3.42 rear axle via a 4l60E automatic with a 3,600 rpm stall torque converter and a custom driveshaft with a custom driveshaft brace. Wiring has been run through the chassis when possible, and plumbing for the cooling and fuel system appear to be well executed. Shorty headers are tied to a single Magnaflow silencer with exits in the rear corners, though a set of wirelessly-controlled exhaust Y-cutouts have been added. -----------------------VIDEO LINK BELOW----------------------------------https://youtu.be/NvgiUoOpj0U
The car is fully street legal currently titled and registered in IL through myself. It has a clear VIN and registration. I have the title in hand. I currently have the car insured through State Farm. I cannot express how much fun this car actually is, and the attention from it is absolutely insane. The next step for this build was installing an LSA supercharger but just didn't get around to it.Car made: 393 rwhp
Weight: 1580 lbsIf you have any question or want to see more photos or videos just let me know text or email1(630)7760600
There's way too much to list I'm sure I'm going to forget 50% of what's on here. Performance:
-5.3 LS
-Custom Grind Comp Cam
-Ls6 Heads
-Ls6 Intake
-Fast Fuel Rails
-4L60E Trans
-3600 Stall
-10 Bolt 3:42 Rear
-Custom drive shaft -Properly caged Driveshaft in the event a universal joint should fail
-Racing Fuel Pump
-Custom Fabricated Air Intake
-Polyethylene Motor Mounts
-Shorty Headers
-Electric Oval Low Profile Cutouts with Wireless Remote
-Magnaflow Exhaust
-Cross Drilled Rotors
-Independent Rear Suspension
-Power SteeringExterior
-Custom Metallic Orange Powder Coating
-Carbon Fiber Accents
-True Flame airbrush work on removable panels
-Black painted intake manifold
-LED Tails lights
-HID headlights
-180 Rear view Mirror
-Custom Seats (custom made to match orange color)
-Polished 13 Gallon Tank
-Black Speedline Wheels 15x7 Fronts
-Black Speedline Wheels15x10 rear
-(4)All new Mickey Thompson tires
-Kenwood KDC-x998 Head Unit (w/bluetooth, HD radio, CD, USB, Aux and more. . .)
-AMP Hidden under dash
-(2) 6.5 Custom Center Mounted Speakers
-Custom LED lit Speakers
-Custom LED lit under dash
-Carbon Fiber Autometer Gauges
-Chrome Fire Extinguisher Custom Mounted
-Electronic Windshield Wiper
-Horn
-Rhino Lined Trunk & Floor
-Computer Under Dash
-OBll Under Dashtags: corvette, viper, ls, ls1, ls2,ls3, custom, buggy, sandrail, bmw, fast, muscle, gto, camaro, mustang, race, race car, street
Description
| Condition: | Used | Street Legal: | Yes |
MAKE AN OFFER!OPEN TO TRADES!!! (C6 Zo6, Viper, Custom Cars...ETC)The frame has been powder coated Metallic Orange with custom airbrushing on the roof and side panels. The cabin features fixed seats, multi-point harnesses, and a Kenwood stereo & amp. The build cost around $66k, and it has covered approximately 4,800 miles since it was completed. This custom rail is completely street legal and has a clear Illinois title in the seller’s name. It is Based on 15’ frame from East Coast Rails, the chassis has been modified for a front engine, wishbone front suspension, and a solid rear axle. The custom-built frame features minimal bodywork and has been powder coated in Metallic Orange. The roof and rear-cabin quarters feature skull and flames airbrush work. Behind the cockpit is a 13-gallon polished stainless steel fuel tank and an open-top rear luggage compartment. Although not pictured, an electric windshield wiper has been installed.Autometer gauges provide engine vitals, gas meter, rpm, oil, coolant, mph and a B&M T-handle gear-selector controls the automatic transmission. A Kenwood stereo is mounted behind a waterproof enclosure in the center console, with speakers mounted behind the seats. The floor is finished in a textured black grip coating. The independent A-arm front suspension uses adjustable coilover shocks and power steering. A set of newer Mickey Thompson tires have been fitted on black Speedline wheels that measure 15×7” in the front and 15×10” out back. Braking is handled by front and rear discs. Power is sent to the 10-bolt 3.42 rear axle via a 4l60E automatic with a 3,600 rpm stall torque converter and a custom driveshaft with a custom driveshaft brace. Wiring has been run through the chassis when possible, and plumbing for the cooling and fuel system appear to be well executed. Shorty headers are tied to a single Magnaflow silencer with exits in the rear corners, though a set of wirelessly-controlled exhaust Y-cutouts have been added. -----------------------VIDEO LINK BELOW----------------------------------https://youtu.be/NvgiUoOpj0U
The car is fully street legal currently titled and registered in IL through myself. It has a clear VIN and registration. I have the title in hand. I currently have the car insured through State Farm. I cannot express how much fun this car actually is, and the attention from it is absolutely insane. The next step for this build was installing an LSA supercharger but just didn't get around to it.Car made: 393 rwhp
Weight: 1580 lbsIf you have any question or want to see more photos or videos just let me know text or email1(630)7760600
There's way too much to list I'm sure I'm going to forget 50% of what's on here. Performance:
-5.3 LS
-Custom Grind Comp Cam
-Ls6 Heads
-Ls6 Intake
-Fast Fuel Rails
-4L60E Trans
-3600 Stall
-10 Bolt 3:42 Rear
-Custom drive shaft
The car is fully street legal currently titled and registered in IL through myself. It has a clear VIN and registration. I have the title in hand. I currently have the car insured through State Farm. I cannot express how much fun this car actually is, and the attention from it is absolutely insane. The next step for this build was installing an LSA supercharger but just didn't get around to it.Car made: 393 rwhp
Weight: 1580 lbsIf you have any question or want to see more photos or videos just let me know text or email1(630)7760600
There's way too much to list I'm sure I'm going to forget 50% of what's on here. Performance:
-5.3 LS
-Custom Grind Comp Cam
-Ls6 Heads
-Ls6 Intake
-Fast Fuel Rails
-4L60E Trans
-3600 Stall
-10 Bolt 3:42 Rear
-Custom drive shaft
-Properly caged Driveshaft in the event a universal joint should fail
-Racing Fuel Pump
-Custom Fabricated Air Intake
-Polyethylene Motor Mounts
-Shorty Headers
-Electric Oval Low Profile Cutouts with Wireless Remote
-Magnaflow Exhaust
-Cross Drilled Rotors
-Independent Rear Suspension
-Power SteeringExterior
-Custom Metallic Orange Powder Coating
-Carbon Fiber Accents
-True Flame airbrush work on removable panels
-Black painted intake manifold
-LED Tails lights
-HID headlights
-180 Rear view Mirror
-Custom Seats (custom made to match orange color)
-Polished 13 Gallon Tank
-Black Speedline Wheels 15x7 Fronts
-Black Speedline Wheels15x10 rear
-(4)All new Mickey Thompson tires
-Kenwood KDC-x998 Head Unit (w/bluetooth, HD radio, CD, USB, Aux and more. . .)
-AMP Hidden under dash
-(2) 6.5 Custom Center Mounted Speakers
-Custom LED lit Speakers
-Custom LED lit under dash
-Carbon Fiber Autometer Gauges
-Chrome Fire Extinguisher Custom Mounted
-Electronic Windshield Wiper
-Horn
-Rhino Lined Trunk & Floor
-Computer Under Dash
-OBll Under Dash
tags: corvette, viper, ls, ls1, ls2,ls3, custom, buggy, sandrail, bmw, fast, muscle, gto, camaro, mustang, race, race car, street-Racing Fuel Pump
-Custom Fabricated Air Intake
-Polyethylene Motor Mounts
-Shorty Headers
-Electric Oval Low Profile Cutouts with Wireless Remote
-Magnaflow Exhaust
-Cross Drilled Rotors
-Independent Rear Suspension
-Power SteeringExterior
-Custom Metallic Orange Powder Coating
-Carbon Fiber Accents
-True Flame airbrush work on removable panels
-Black painted intake manifold
-LED Tails lights
-HID headlights
-180 Rear view Mirror
-Custom Seats (custom made to match orange color)
-Polished 13 Gallon Tank
-Black Speedline Wheels 15x7 Fronts
-Black Speedline Wheels15x10 rear
-(4)All new Mickey Thompson tires
-Kenwood KDC-x998 Head Unit (w/bluetooth, HD radio, CD, USB, Aux and more. . .)
-AMP Hidden under dash
-(2) 6.5 Custom Center Mounted Speakers
-Custom LED lit Speakers
-Custom LED lit under dash
-Carbon Fiber Autometer Gauges
-Chrome Fire Extinguisher Custom Mounted
-Electronic Windshield Wiper
-Horn
-Rhino Lined Trunk & Floor
-Computer Under Dash
-OBll Under Dash