Back to the main page Back to category Andrews
Bike details
ANDREWS CAMS FOR EVOLUTION BIG TWINS
Estimated price for orientation: 167 $
Category: Andrews
Class:
Description
EV3 Grind/.495” Lift- Bolt-in performance for FXR type bikes
- This is a 6000+ RPM cam with stock heads, springs and hydraulic lifters
EV13 Grind/.495” Lift- Bolt-in cam for street/touring use has more mid-range and top end power over stock
EV23- Best used with stock compression ratio
- Helps 96 cycles with 65 tooth sprockets
- Crisp throttle response and strong pulling power from 1500 to 6000 RPM
- Excellent cam for heavy touring bikes and high geared bikes
- Works well in higher altitudes
EV27 Grind/.495” Lift- Bolt-in street cam with fast open and close ramps
- Similar in timing to EV3 but designed to produce a very broad torque band
- Excellent cam for full dress touring bikes
- Pulls 1500 to 6000 RPM
EV46 Grind/.495” Lift- Bolt-in performance cam with fast open and close ramps
- Similar to EV3 but with higher static compression pressure for 6000+ RPM with stock heads and hydraulic lifters
EV51 Grind/.510” Lift- Easy installation with longer duration for modified street engines with hydraulic lifters and a 9/1+ compression ratio
EV59 Grind/.560” Lift- Upgraded cam with fast ramps for modified 80” and 88” motors
- Use with AP springs and collars
- Very broad power band; 6000 RPM
- May be used with hydraulic lifters
EV72 Grind/.560” Lift- Upgraded cam for 92”+ street motors
- Use with Andrews springs and titanium collars
- Very broad power band, 2800-6000 RPM
- May be used with hydraulic lifters
EV31- Super power for supercharged engines
- Basically an EV27 cam with timing set for supercharges or big inch motors with 10.5+ compression
NOTES:Measurement of cam and pinion gears is especially critical for 90 and later models to verify proper fit.
Description
EV3 Grind/.495” Lift
- Bolt-in performance for FXR type bikes
- This is a 6000+ RPM cam with stock heads, springs and hydraulic lifters
EV13 Grind/.495” Lift
- Bolt-in cam for street/touring use has more mid-range and top end power over stock
EV23
- Best used with stock compression ratio
- Helps 96 cycles with 65 tooth sprockets
- Crisp throttle response and strong pulling power from 1500 to 6000 RPM
- Excellent cam for heavy touring bikes and high geared bikes
- Works well in higher altitudes
EV27 Grind/.495” Lift
- Bolt-in street cam with fast open and close ramps
- Similar in timing to EV3 but designed to produce a very broad torque band
- Excellent cam for full dress touring bikes
- Pulls 1500 to 6000 RPM
EV46 Grind/.495” Lift
- Bolt-in performance cam with fast open and close ramps
- Similar to EV3 but with higher static compression pressure for 6000+ RPM with stock heads and hydraulic lifters
EV51 Grind/.510” Lift
- Easy installation with longer duration for modified street engines with hydraulic lifters and a 9/1+ compression ratio
EV59 Grind/.560” Lift
- Upgraded cam with fast ramps for modified 80” and 88” motors
- Use with AP springs and collars
- Very broad power band; 6000 RPM
- May be used with hydraulic lifters
EV72 Grind/.560” Lift
- Upgraded cam for 92”+ street motors
- Use with Andrews springs and titanium collars
- Very broad power band, 2800-6000 RPM
- May be used with hydraulic lifters
EV31
- Super power for supercharged engines
- Basically an EV27 cam with timing set for supercharges or big inch motors with 10.5+ compression
NOTES:
Measurement of cam and pinion gears is especially critical for 90 and later models to verify proper fit.