Back to the main page Back to category Scooters and Mopeds
Bike details
Vespa 50cc 1968
Estimated price for orientation: 900 $
Category: Scooters and Mopeds
Class:
Description Condition: Used Make: vespa Engine Size: 50cc Model Year: 1968 Fuel Type: Gas
You are bidding on a vespa smallframe 50cc 1968 in super red. Fully restored, run and look like new!
Top speed: 30MPH
Color: super red.
Restoration:We use genuine Vespa parts or brand new parts if original one is not available. Here are some new parts that we use: New Cylinder and new piston, piston rings, Front/rear brakes, Kick start, Drums, Front axle, All bearings, Seals, Hub caps, 10'' wheels, tires, tubes, Fuel tap, levers, Front/rear lights, All cables, Vinyl seats, All rubber parts, All electrical components, Exhaust system, All electrical wires/switches and assemblies ,Speedometer (kph), Horn, Spark plug, Shocks, suspensions, ..... › Firstly, All scooters are stripped down to bare metal. All rubber, plastic, leather, aged aluminum trim cover, electrical wires and harness are usually just thrown away.
› Fired under high temperature to remove all metal pieces which are fragile or weak.
› Body frames are sent to body shop to be inspected. After sanding down to bare metal we inspect them with a magnifier for cracks, welding material and other abnormalities before the alignment step. After inspecting we apply a primer coat then finish with final color paint.
› The painting: we use is ICI and DuPont, paintings is done inside dust-free environment with waterfall curtain wall. The bike will be covered with the rust protection layer. It is held in the baking room (using magnetic wave) at a suitable temperature to keep dry and cure the painting.
› Engine is fully restoared from the ground up, run and look like new!AFTER REBUILDING, WE TEST THE SCOOTER ABOUT 150 KM TO MAKE SURE THAT IS IN GOOD RUNNING & WORKING CONDITIONS, ALL LIGHTS ARE WORKING FINE AND THE SCOOTER GOES UP TO 30MPH WITH NO PROBLEMS.Warranty:There is a 6 months warranty with the scooters. if any part goes bad, we will send a replacement part immediately in our cost. We dont need the return of the fail parts.Shipping and registration:- We ship worldwide with the cost of $380, the shipping normally take about 3 - 6 weeks to all major ports of the world. The bike will be sent to the nearest warehouse to your address. if you want to use Door to door services, just tell the shipping company and pay for additional cost depending on distance.
- We will provide the Purchase Slip from the owner and the Certificate of Title Deleting in Vietnam so you can get this bike registered easily, just take these papers to the Authority Office and get new title.
Description
| Condition: | Used | Make: | vespa |
| Engine Size: | 50cc | Model Year: | 1968 |
| Fuel Type: | Gas |
You are bidding on a vespa smallframe 50cc 1968 in super red. Fully restored, run and look like new!
Top speed: 30MPH
Color: super red.
Restoration:We use genuine Vespa parts or brand new parts if original one is not available. Here are some new parts that we use: New Cylinder and new piston, piston rings, Front/rear brakes, Kick start, Drums, Front axle, All bearings, Seals, Hub caps, 10'' wheels, tires, tubes, Fuel tap, levers, Front/rear lights, All cables, Vinyl seats, All rubber parts, All electrical components, Exhaust system, All electrical wires/switches and assemblies ,Speedometer (kph), Horn, Spark plug, Shocks, suspensions, ..... › Firstly, All scooters are stripped down to bare metal. All rubber, plastic, leather, aged aluminum trim cover, electrical wires and harness are usually just thrown away.
› Fired under high temperature to remove all metal pieces which are fragile or weak.
› Body frames are sent to body shop to be inspected. After sanding down to bare metal we inspect them with a magnifier for cracks, welding material and other abnormalities before the alignment step. After inspecting we apply a primer coat then finish with final color paint.
› The painting: we use is ICI and DuPont, paintings is done inside dust-free environment with waterfall curtain wall. The bike will be covered with the rust protection layer. It is held in the baking room (using magnetic wave) at a suitable temperature to keep dry and cure the painting.
› Engine is fully restoared from the ground up, run and look like new!AFTER REBUILDING, WE TEST THE SCOOTER ABOUT 150 KM TO MAKE SURE THAT IS IN GOOD RUNNING & WORKING CONDITIONS, ALL LIGHTS ARE WORKING FINE AND THE SCOOTER GOES UP TO 30MPH WITH NO PROBLEMS.Warranty:There is a 6 months warranty with the scooters. if any part goes bad, we will send a replacement part immediately in our cost. We dont need the return of the fail parts.Shipping and registration:- We ship worldwide with the cost of $380, the shipping normally take about 3 - 6 weeks to all major ports of the world. The bike will be sent to the nearest warehouse to your address. if you want to use Door to door services, just tell the shipping company and pay for additional cost depending on distance.
- We will provide the Purchase Slip from the owner and the Certificate of Title Deleting in Vietnam so you can get this bike registered easily, just take these papers to the Authority Office and get new title.